ath79: use gpios for switch management in WZR-HP-G300NH variants

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_nec_wg800hp.dts

diff --git a/target/linux/ath79/dts/qca9563_nec_wg800hp.dts b/target/linux/ath79/dts/qca9563_nec_wg800hp.dts
index 607db3ca22e1c3a3ccd36d2fa785b0cd79ad8e96..1069a63a5e052b6c9be4d96c23b462dbdc1f3b19 100644 (file)
--- a/target/linux/ath79/dts/qca9563_nec_wg800hp.dts
+++ b/target/linux/ath79/dts/qca9563_nec_wg800hp.dts
@@ -22,44 +22,44 @@
                pinctrl-0 = <&jtag_disable_pins>;
 
                wlan2g_red {
-                       label = "wg800hp:red:wlan2g";
+                       label = "red:wlan2g";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                };
 
                active_red {
-                       label = "wg800hp:red:active";
+                       label = "red:active";
                        gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
                };
 
                active_green {
-                       label = "wg800hp:green:active";
+                       label = "green:active";
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                };
 
                led_power_red: power_red {
-                       label = "wg800hp:red:power";
+                       label = "red:power";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                led_power_green: power_green {
-                       label = "wg800hp:green:power";
+                       label = "green:power";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                wlan5g_red {
-                       label = "wg800hp:red:wlan5g";
+                       label = "red:wlan5g";
                        gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
                };
 
                wlan5g_green {
-                       label = "wg800hp:green:wlan5g";
+                       label = "green:wlan5g";
                        gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "phy0tpt";
                };
 
                wlan2g_green {
-                       label = "wg800hp:green:wlan2g";
+                       label = "green:wlan2g";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
@@ -94,7 +94,6 @@
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
@@ -173,10 +172,6 @@
        status = "okay";
 };
 
-&uart {
-       status = "okay";
-};
-
 &wmac {
        status = "okay";
        qca,no-eeprom;