ath79: TP-Link EAP245 v3: convert radios to nvmem-cells

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_tplink_archer-x7-v5.dtsi

diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
index 2e66e0f03e6270ad0c4cebb020d0fa72710a85fe..fd0f10ff27e0bda54529acb3d75b407a7a95c4ab 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
@@ -1,89 +1,83 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca956x.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca956x.dtsi"
-
 / {
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
        aliases {
-               led-boot = &system;
-               led-failsafe = &system;
-               led-running = &system;
-               led-upgrade = &system;
-               label-mac-device = &eth0;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
        };
 
-       gpio_leds: leds {
+       leds {
                compatible = "gpio-leds";
 
-               system: system {
-                       label = "tp-link:green:system";
+               led_system: system {
+                       label = "green:system";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                usb {
-                       label = "tp-link:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&hub_port0>;
                        linux,default-trigger = "usbport";
                };
 
                wlan5g {
-                       label = "tp-link:green:wlan5g";
+                       label = "green:wlan5g";
                        gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
-               led_wlan2g: wlan2g {
-                       label = "tp-link:green:wlan2g";
+               wlan2g {
+                       label = "green:wlan2g";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
 
                wan {
-                       label = "tp-link:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };
 
                wan_fail {
-                       label = "tp-link:orange:wan";
+                       label = "orange:wan";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
 
                lan1 {
-                       label = "tp-link:green:lan1";
+                       label = "green:lan1";
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                };
 
                lan2 {
-                       label = "tp-link:green:lan2";
+                       label = "green:lan2";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                };
 
                lan3 {
-                       label = "tp-link:green:lan3";
+                       label = "green:lan3";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
 
                lan4 {
-                       label = "tp-link:green:lan4";
+                       label = "green:lan4";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                wps {
-                       label = "tp-link:green:wps";
+                       label = "green:wps";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                };
        };
 
-       gpio_keys: keys {
+       keys: keys {
                compatible = "gpio-keys";
 
                wps {
@@ -109,14 +103,6 @@
        status = "okay";
 };
 
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
 &usb_phy0 {
        status = "okay";
 };
@@ -134,7 +120,6 @@
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
@@ -152,8 +137,6 @@
 &mdio0 {
        status = "okay";
 
-       phy-mask = <0>;
-
        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "sgmii";
@@ -163,7 +146,7 @@
                        0x04 0x80080080 /* PORT0 PAD MODE CTRL */
                        0x08 0x00000000 /* PORT5 PAD MODE CTRL */
                        0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
-                       0x10 0x00000080 /* POWER_ON_STRIP */
+                       0x10 0x00000080 /* POWER_ON_STRAP */
                        0x7c 0x0000007e /* PORT0_STATUS */
                        0x94 0x00000200 /* PORT6_STATUS */
                        >;
@@ -176,12 +159,9 @@
        pll-data = <0x03000101 0x00000101 0x00001919>;
 
        phy-mode = "sgmii";
-       mtd-mac-address = <&info 0x8>;
        phy-handle = <&phy0>;
 };
 
 &wmac {
        status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&info 0x8>;
 };