ath79: add support for D-Link DIR-859 A3

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 57cd78989a393616a0b26c920c8489af9f068cae..2ee4ed2544d97d5b27bf8135c8fdce27d5adc26a 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -10,6 +10,12 @@ case "$board" in
        ucidef_set_led_netdev "lan" "LAN" "orange:eth0" "eth0"
        ucidef_set_led_switch "wan" "WAN" "orange:eth1" "switch0" "0x04"
        ;;
+alcatel,hh40v)
+       ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan" "eth1" "tx rx"
+       ucidef_set_led_netdev "lan_link" "LAN Link" "orange:lan" "eth1" "link"
+       ucidef_set_led_netdev "wan_data" "WAN Data" "green:wan" "eth0" "tx rx"
+       ucidef_set_led_netdev "wan_link" "WAN Link" "orange:wan" "eth0" "link"
+       ;;
 alfa-network,ap121f|\
 alfa-network,ap121fe|\
 avm,fritz450e|\
@@ -18,6 +24,7 @@ glinet,6416|\
 glinet,gl-ar300m-lite|\
 glinet,gl-ar300m16|\
 pcs,cap324|\
+tplink,cpe605-v1|\
 tplink,cpe610-v1|\
 tplink,cpe610-v2|\
 tplink,tl-wa1201-v2)
@@ -41,6 +48,7 @@ alfa-network,n5q)
        ucidef_set_led_rssi "signal4" "SIGNAL4" "green:signal4" "wlan0" "75" "100"
        ;;
 alfa-network,pi-wifi4|\
+watchguard,ap100|\
 watchguard,ap200|\
 watchguard,ap300)
        ucidef_set_led_netdev "lan_data" "LAN_DATA" "orange:lan_data" "eth0" "tx rx"
@@ -226,6 +234,9 @@ dlink,dap-1365-a1)
 dlink,dir-859-a1)
        ucidef_set_led_switch "internet" "WAN" "green:internet" "switch0" "0x20"
        ;;
+dlink,dir-859-a3)
+       ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x20"
+       ;;
 engenius,ens202ext-v1|\
 engenius,enstationac-v1)
        ucidef_set_rssimon "wlan0" "200000" "1"
@@ -266,6 +277,11 @@ hiwifi,hc6361)
        ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
        ucidef_set_led_wlan "wlan" "WLAN" "blue:wlan" "phy0tpt"
        ;;
+kuwfi,c910)
+       ucidef_set_led_netdev "wan" "WAN" "white:wan" "eth1"
+       ucidef_set_led_switch "lan1" "LAN1" "white:lan1" "switch0" "0x10"
+       ucidef_set_led_switch "lan2" "LAN2" "white:lan2" "switch0" "0x02"
+       ;;
 meraki,mr12|\
 tplink,cpe210-v2|\
 tplink,cpe210-v3)
@@ -326,6 +342,13 @@ qca,ap143-16m)
 qihoo,c301)
        ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
        ;;
+ruckus,zf7025)
+       ucidef_set_led_netdev "lan" "LAN5" "green:lan5" "eth0"
+       ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
+       ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
+       ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
+       ;;
 ruckus,zf7372)
        ucidef_set_led_switch "lan" "LAN" "green:eth1" "switch0" "0x02"
        ;;
@@ -336,6 +359,13 @@ teltonika,rut230-v1)
        ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
        ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x04"
        ;;
+teltonika,rut300)
+       ucidef_set_led_netdev "wan" "WAN" "yellow:wan" "eth1"
+       ucidef_set_led_switch "lan1" "LAN1" "yellow:lan1" "switch0" "0x02"
+       ucidef_set_led_switch "lan2" "LAN2" "yellow:lan2" "switch0" "0x10"
+       ucidef_set_led_switch "lan3" "LAN3" "yellow:lan3" "switch0" "0x08"
+       ucidef_set_led_switch "lan4" "LAN4" "yellow:lan4" "switch0" "0x04"
+       ;;
 tplink,archer-a7-v5|\
 tplink,archer-c7-v4|\
 tplink,archer-c7-v5)