ipq40xx: Adjust SoC name of AVM Fritz!Box 4040

[openwrt/openwrt.git] / target / linux / brcm63xx / config-4.4

diff --git a/target/linux/brcm63xx/config-4.4 b/target/linux/brcm63xx/config-4.4
index 2cd3fcb87808fb89a6b48c109e2854d277e3893b..755590f537d835d9ea061cafae271a19e9d34d3a 100644 (file)
--- a/target/linux/brcm63xx/config-4.4
+++ b/target/linux/brcm63xx/config-4.4
@@ -47,6 +47,7 @@ CONFIG_BOARD_BCM963XX=y
 CONFIG_BOARD_LIVEBOX=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_CPU_BMIPS=y
@@ -75,11 +76,11 @@ CONFIG_GENERIC_IO=y
 CONFIG_GENERIC_IRQ_CHIP=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
 CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
 CONFIG_GPIO_BCM63XX=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_GENERIC=y
@@ -138,9 +139,12 @@ CONFIG_IRQ_MIPS_CPU=y
 CONFIG_IRQ_WORK=y
 CONFIG_KEXEC=y
 CONFIG_KEXEC_CORE=y
+CONFIG_LEDS_BCM6328=y
+CONFIG_LEDS_BCM6358=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LIBFDT=y
 CONFIG_MDIO_BOARDINFO=y
+CONFIG_MFD_SYSCON=y
 CONFIG_MIPS=y
 CONFIG_MIPS_CLOCK_VSYSCALL=y
 # CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
@@ -162,7 +166,6 @@ CONFIG_MTD_CFI_BE_BYTE_SWAP=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 # CONFIG_MTD_CFI_NOSWAP is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_M25P80=y
@@ -193,13 +196,23 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM6318=y
+CONFIG_PINCTRL_BCM63268=y
+CONFIG_PINCTRL_BCM6328=y
+CONFIG_PINCTRL_BCM6348=y
+CONFIG_PINCTRL_BCM6358=y
+CONFIG_PINCTRL_BCM6362=y
+CONFIG_PINCTRL_BCM6368=y
+CONFIG_PINCTRL_BCM63XX=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
 CONFIG_RELAY=y
 CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367_PHY=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250 is not set
@@ -208,8 +221,6 @@ CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM63XX=y
 CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 CONFIG_SQUASHFS_EMBEDDED=y
 CONFIG_SRCU=y