more fixes for bcm6338, no need not to prevent reads from MPI registers now that...

[openwrt/openwrt.git] / target / linux / brcm63xx / files / arch / mips / bcm63xx / boards / board_bcm963xx.c

diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
index c41951b98805a246f6f67caee5ea0d8d2b2bc3b0..e27264dfdf13fc1243fd2d7c53116ad8b3f73e0e 100644 (file)
--- a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -45,11 +45,11 @@ static struct board_info board;
 static struct board_info __initdata board_96338gw = {
        .name                           = "96338GW",
        .expected_cpu_id                = 0x6338,
-
+       
        .has_enet0                      = 1,
        .enet0 = {
-               .has_phy                = 1,
-               .use_internal_phy       = 1,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
        },
 
        .has_ohci0                      = 1,
@@ -58,8 +58,12 @@ static struct board_info __initdata board_96338gw = {
 static struct board_info __initdata board_96338w = {
        .name                           = "96338W",
        .expected_cpu_id                = 0x6338,
-
+       
        .has_enet0                      = 1,
+       .enet0 = {
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       }
 };
 #endif
 
@@ -326,7 +330,7 @@ void __init board_prom_init(void)
        /* read base address of boot chip select (0) 
         * 6338/6345 does not have MPI but boots from standard
         * MIPS Flash address */
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6345())
+       if (BCMCPU_IS_6345())
                val = 0x1fc00000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));
@@ -554,7 +558,7 @@ int __init board_register_devices(void)
 #endif
 
        /* read base address of boot chip select (0) */
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6345())
+       if (BCMCPU_IS_6345())
                val = 0x1fc0000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));