-#
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2015 OpenWrt.org
+# Copyright (C) 2016 LEDE project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-LOADADDR = 0x80010000 # RAM start + 16M
+LOADADDR = 0x80010000 # RAM start + 64K
KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
-RAMSIZE = 0x01000000 # 64MB
+LOADER_ENTRY = 0x80a00000 # RAM start + 10M, for relocate
+RAMSIZE = 0x02000000 # 32MB
+LZMA_TEXT_START = 0x81800000 # 32MB - 8MB
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
- RAMSIZE=$(RAMSIZE)
+ RAMSIZE=$(RAMSIZE) \
+ LZMA_TEXT_START=$(LZMA_TEXT_START) \
+
+RELOCATE_MAKEOPTS= \
+ CACHELINE_SIZE=16 \
+ KERNEL_ADDR=$(KERNEL_ENTRY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ LZMA_TEXT_START=$(LOADER_ENTRY)
+
+define Build/Compile
+ rm -rf $(KDIR)/relocate
+ $(CP) ../../generic/image/relocate $(KDIR)
+ $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS)
+endef
-SVN_REVISION=r$(shell svn info|grep Revision|cut -f1 -d\ )
+### Kernel scripts ###
+define Build/append-dtb
+ $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
+ cat $@.dtb >> $@
+endef
-define trxalign/jffs2-128k
--a 0x20000
+define Build/hcs-initramfs
+ $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \
+ --rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \
+ --output_file=$@.hcs --ldaddress=$(LOADADDR)
+ mv $@.hcs $@
endef
-define trxalign/jffs2-64k
--a 0x10000
+
+define Build/loader-lzma
+ rm -rf $@.src
+ $(MAKE) -C lzma-loader \
+ $(LOADER_MAKEOPTS) \
+ PKG_BUILD_DIR="$@.src" \
+ TARGET_DIR="$(dir $@)" \
+ LOADER_DATA="$@" \
+ LOADER_NAME="$(notdir $@)" \
+ compile loader.$(1)
+ mv "$@.$(1)" "$@"
+ rm -rf $@.src
endef
-define trxalign/squashfs
--a 1024
+
+define Build/lzma
+ # CFE is a LZMA nazi! It took me hours to find out the parameters!
+ # Also I think lzma has a bug cause it generates different output depending on
+ # if you use stdin / stdout or not. Use files instead of stdio here, cause
+ # otherwise CFE will complain and not boot the image.
+ $(STAGING_DIR_HOST)/bin/lzma e $@ -d22 -fb64 -a1 $@.lzma
+ mv $@.lzma $@
endef
-define Image/Build/CFE
- # Generate the tagged image
- $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(6)-cfe.bin \
- -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
- -t $(4) -d "$(5)" $(7)
-# -b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
+define Build/lzma-cfe
+ # Strip out the length, CFE doesn't like this
+ dd if=$@ of=$@.lzma.cfe bs=5 count=1
+ dd if=$@ of=$@.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+ mv $@.lzma.cfe $@
+endef
+define Build/relocate-kernel
+ # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
+ # kernel might get larger than that, so let CFE unpack and load at a
+ # higher address and make the kernel relocate itself to the expected
+ # location.
+ ( \
+ dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
+ perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
+ cat $@ \
+ ) > $@.relocate
+ mv $@.relocate $@
endef
-define Image/Build/CFEAGPF
- # Generate the tagged image
- $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(7)-cfe.bin \
- -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
- -v 8 -m IMAGE -k 0x20000 -n $(4) -t $(5)
+### Image scripts ###
+define rootfspad/jffs2-128k
+--align-rootfs
+endef
+define rootfspad/jffs2-64k
+--align-rootfs
+endef
+define rootfspad/squashfs
endef
-define Image/Build/RedBoot
- cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
- gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
- dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
- dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
+define Image/LimitName16
+$(shell expr substr "$(1)" 1 16)
endef
-define Image/Build/CFEOLD
- $(TOPDIR)/scripts/brcmImage.pl -t -p \
- -b $(2) -c $(3) \
- -k $(KDIR)/vmlinux.lzma.cfe \
- -r $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
+define Image/FileSystemStrip
+$(subst root.,,$(notdir $(1)))
endef
-define Build/Clean
- $(MAKE) -C lzma-loader clean
+define Build/cfe-bin
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(word 1,$^) -f $(word 2,$^) \
+ --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
+ --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
+ --info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \
+ --info2 "$(call Image/FileSystemStrip,$(word 2,$^))" \
+ $(call rootfspad/$(call Image/FileSystemStrip,$(word 2,$^))) \
+ $(CFE_EXTRAS) $(1)
endef
-define Image/Prepare
- # Standard LZMA kernel
- cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+define Build/cfe-old-bin
+ $(TOPDIR)/scripts/brcmImage.pl -t -p \
+ -o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \
+ -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \
+ -k $(word 1,$^) -r $(word 2,$^) \
+ $(CFE_EXTRAS)
+endef
- # CFE is a LZMA nazi! It took me hours to find out the parameters!
- # Also I think lzma has a bug cause it generates different output depending on
- # if you use stdin / stdout or not. Use files instead of stdio here, cause
- # otherwise CFE will complain and not boot the image.
- $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+define Build/cfe-spw303v-bin
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(word 1,$^) -f $(word 2,$^) \
+ --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
+ --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
+ $(call rootfspad/$(call Image/FileSystemStrip,$(word 2,$^))) \
+ $(CFE_EXTRAS)
+endef
- # Strip out the length, CFE doesn't like this
- dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
- dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
- rm -f $(KDIR)/vmlinux.lzma.tmp
+define Build/spw303v-bin
+ $(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
+ mv $@.spw303v $@
+endef
- # Build the LZMA loader
- rm -f $(KDIR)/loader.gz
- $(MAKE) -C lzma-loader \
- BUILD_DIR="$(KDIR)" \
- TARGET="$(KDIR)" \
- clean install
-
- echo -ne "\\x00" >> $(KDIR)/loader.gz
- rm -f $(KDIR)/fs_mark
- touch $(KDIR)/fs_mark
- $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
-endef
-
-define Image/Build
- $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
- # Various routers
- $(call Image/Build/CFE,$(1),96345GW2,6345,bccfe,,bccfe,)
- $(call Image/Build/CFE,$(1),96345GW2,6345,bc221,,bc221,-y 5)
- $(call Image/Build/CFE,$(1),96345GW2,6345,bc300,,bc300,)
- $(call Image/Build/CFE,$(1),96345GW2,6345,bc310,OpenWRT-$(SVN_REVISION),bc310,)
- $(call Image/Build/CFE,$(1),96348GW,6348,bccfe,,bcfe,)
- $(call Image/Build/CFE,$(1),96348GW,6348,bc221,,bc221,-y 5)
- # BT Voyager V210_BTR
- $(call Image/Build/CFE,$(1),V210_BB,6348,bc221,,btvgr,-y 5)
- # BT Voyager V210_ROI, V210_WB
- $(call Image/Build/CFE,$(1),V210,6348,bc221,,btvgr,-y 5)
- # BT Voyager V2091_BTR
- $(call Image/Build/CFE,$(1),V2091_BB,6348,bc221,,btvgr,-y 5)
- # BT Voyager V2091_ROI, V2091_WB
- $(call Image/Build/CFE,$(1),V2091,6348,bc221,,btvgr,-y 5)
- # BT Voyager V220V, V220V_MGCP_BTR
- $(call Image/Build/CFE,$(1),RTA1052V,6348,bc221,,btvgr,-y 5)
- # BT Voyager V2110, V2110_AA, V2110_ROI
- $(call Image/Build/CFE,$(1),V2110,6348,bc221,,btvgr,-y 5)
- # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
- $(call Image/Build/CFE,$(1),V2500V_BB,6348,bc221,,btvgr,-y 5)
- # Tecom GW6000
- $(call Image/Build/CFE,$(1),96348GW,6348,bc300,,bc300,)
- # Tecom GW6200
- $(call Image/Build/CFE,$(1),96348GW,6348,bc310,$(shell printf '\x99'),gw6200)
- # Neufbox4
- $(call Image/Build/CFE,$(1),96358VW,6358,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96358VW,6358,bc310,OpenWRT-$(SVN_REVISION),nb4)
- # Comtrend 536, 5621
- $(call Image/Build/CFE,$(1),96348GW-11,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96348GW-11,6348,bc300,,bc300)
- # TP-Link 8900GB
- $(call Image/Build/CFE,$(1),96348GW-11,6348,bc310,$(shell printf 'PRID\x89\x10\x00\x02'),td8900GB)
- # Davolink DV201AMR
- $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
- # USR 9108
- $(call Image/Build/CFE,$(1),96348GW-A,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96348GW-A,6348,bc300,,bc300)
- # NetGear DG834GT, DG834PN
- $(call Image/Build/CFE,$(1),96348GW-10,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96348GW-10,6348,bc300,,bc300)
- # Belkin f5d7633
- $(call Image/Build/CFE,$(1),96348GW-10,6348,bc310,,bc310)
- # D-Link DSL-2640B
- $(call Image/Build/CFE,$(1),D-4P-W,6348,bc310,,bc310)
-
- # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
- $(call Image/Build/CFE,$(1),8L-2M-8M,6338,bc300,,bc300)
-
- # Sagem F@ST2404
- $(call Image/Build/CFE,$(1),F@ST2404,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),F@ST2404,6348,bc300,,bc300)
- $(call Image/Build/CFE,$(1),F@ST2404,6348,bc310,OpenWRT-$(SVN_REVISION),bc310)
- # Inventel Livebox
- $(call Image/Build/RedBoot,livebox)
- # D-Link DSL-2740B
- $(call Image/Build/CFE,$(1),96358GW,6358,bc310,,dsl2740b)
- # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
- $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,bccfe,,bccfe)
- $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,ag306,,agv2+w)
+define Build/xor-image
+ $(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor
+ mv $@.xor $@
+endef
+
+define Build/zyxel-bin
+ $(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel
+ mv $@.zyxel $@
+endef
+
+define Build/redboot-bin
+ # Prepare kernel and rootfs
+ dd if=$(word 1,$^) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync
+ dd if=$(word 2,$^) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) bs=64k conv=sync
+ echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^))
+ # Generate the scripted image
+ $(TOPDIR)/scripts/redboot-script.pl \
+ -k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \
+ -r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) \
+ -a $(strip $(LOADADDR)) -f 0xbe430000 -l 0x7c0000 \
+ -s 0x1000 -t 20 -o $@.redbootscript
+ dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync
+ cat \
+ "$@.redbootscript.padded" \
+ "$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \
+ "$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^))" \
+ > "$@"
+endef
+
+define Device/Default
+ PROFILES = Default
+ KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
+ KERNEL_INITRAMFS_IMAGE = $$(KERNEL_INITRAMFS_PREFIX).elf
+ DEVICE_DTS :=
endef
+DEVICE_VARS += DEVICE_DTS
+
+ATH5K_PACKAGES := kmod-ath5k wpad-mini
+ATH9K_PACKAGES := kmod-ath9k wpad-mini
+B43_PACKAGES := kmod-b43 wpad-mini
+BRCMWL_PACKAGES := kmod-brcm-wl nas wlc
+RT28_PACKAGES := kmod-rt2800-pci wpad-mini
+RT61_PACKAGES := kmod-rt61-pci wpad-mini
+USB1_PACKAGES := kmod-usb-ohci kmod-ledtrig-usbdev
+USB2_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
+
+include bcm63xx.mk
$(eval $(call BuildImage))