#
-# Copyright (C) 2009 OpenWrt.org
+# Copyright (C) 2009-2018 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-define Image/Prepare
-# WBD111: mach id 1690 (0x69a)
- echo -en "\x06\x1c\xa0\xe3\x9a\x10\x81\xe3" > $(KDIR)/openwrt-$(BOARD)-wbd111-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/openwrt-$(BOARD)-wbd111-zImage
+# Cook a "WRGG" image, this board is apparently one in the D-Link
+# WRGG family and uses the exact same firmware format as other
+# D-Link devices.
+define Build/dir685-images
+ mkwrggimg -i $(IMAGE_KERNEL) \
+ -o $(BIN_DIR)/$(IMG_PREFIX)-dir685-fwupdate.bin \
+ -d /dev/mtdblock/1 \
+ -s wrgns01_dlwbr_dir685RBWW \
+ -v 'N/A' \
+ -m dir685 \
+ -B 96bb
endef
-define Image/BuildKernel
-# workaround the bootloader's bug with extra nops
- echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $(BIN_DIR)/openwrt-$(BOARD)-wbd111-zImage
- cat $(KDIR)/openwrt-$(BOARD)-wbd111-zImage >> $(BIN_DIR)/openwrt-$(BOARD)-wbd111-zImage
+# Build D-Link DNS-313 images using the special header tool.
+# rootfs.tgz and rd.tgz contains nothing, we only need them
+# to satisfy the boot loader on the device. The zImage is
+# the only real content.
+define Build/dns313-images
+ if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
+ mkdir -p $(BIN_DIR)/.boot
+ echo "dummy" > $(BIN_DIR)/.boot/dummyfile
+ dns313-header $(BIN_DIR)/.boot/dummyfile \
+ $(BIN_DIR)/.boot/rootfs.tgz
+ dns313-header $(BIN_DIR)/.boot/dummyfile \
+ $(BIN_DIR)/.boot/rd.gz
+ dns313-header $(IMAGE_KERNEL) \
+ $(BIN_DIR)/.boot/zImage
+ rm -f $(BIN_DIR)/.boot/dummyfile
+ (cd $(BIN_DIR); tar -czf $(IMG_PREFIX)-dns313-bootpart.tar.gz .boot)
+ if [ -d $(BIN_DIR)/.boot ] ; then rm -rf $(BIN_DIR)/.boot ; fi
endef
-define Image/Build/jffs2-64k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=64k conv=sync
+# Create the special NAS4220B and Itian Square One SQ201 image
+# format with the squashfs and overlay inside the "rd.gz" file.
+# We pad it out to 6144K which is the size of the initramfs partition.
+#
+# The "application" partition is just blank. You can put anything
+# there when using OpenWRT. We just use that to create the
+# "sysupgrade" firmware image.
+define Build/nas4220b-sq201-images
+ rm -rf $@-tmp
+ mkdir -p $@-tmp
+ dd if=$(IMAGE_ROOTFS) of=$@-tmp/rd.gz bs=6144k conv=sync
+ dd if=/dev/zero of=$@-tmp/hddapp.tgz bs=6144k count=1
+ cp $(IMAGE_KERNEL) $@-tmp/zImage
+ cp ./ImageInfo-$(1) $@-tmp/ImageInfo
+ (cd $@-tmp; tar --owner=0 --group=0 --numeric-owner --mtime=@$(SOURCE_DATE_EPOCH) \
+ -czf $@ ImageInfo zImage rd.gz hddapp.tgz)
+ rm -rf $@-tmp
+endef
+
+# WBD-111 and WBD-222:
+# work around the bootloader's bug with extra nops
+# FIXME: is this really needed now that we no longer append the code
+# to change the machine ID number? Needs testing on Wiliboard.
+define Build/wbd-nops
+ mv $@ $@.tmp
+ echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $@
+ cat $@.tmp >> $@
+ rm -f $@.tmp
+endef
+
+# All DTB files are prefixed with "gemini-"
+define Device/Default
+ PROFILES := Default
+ DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL_NAME := zImage
+ KERNEL := kernel-bin | append-dtb
+ FILESYSTEMS := squashfs
+ IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+endef
+
+# A reasonable set of default packages handling the NAS type
+# of devices out of the box (former NAS42x0 IcyBox defaults)
+GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \
+ kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
+ kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
+ kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
+ kmod-nls-utf8 kmod-usb-storage-extras \
+ samba36-server mdadm cfdisk fdisk e2fsprogs badblocks
+
+define Device/dlink-dir-685
+ DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
+ DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
+ kmod-switch-rtl8366rb swconfig \
+ rt2800-pci
+ IMAGES += dir685-image
+ IMAGE/dir685-image := dir685-images
endef
+TARGET_DEVICES += dlink-dir-685
-define Image/Build/jffs2-128k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=128k conv=sync
+define Device/dlink-dns-313
+ DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
+ DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
+ IMAGES += dns313-image
+ IMAGE/dns313-image := dns313-images
endef
+TARGET_DEVICES += dlink-dns-313
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+define Device/nas4220b-sq201
+ ARTIFACTS := zImage
+ ARTIFACT/zImage := append-kernel
+ IMAGES += rd.gz sysupgrade.tar.gz
+ IMAGE/rd.gz := append-rootfs | pad-to 6144k
+ IMAGE/sysupgrade.tar.gz := nas4220b-sq201-images $(1)
+ DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
endef
-define Image/Build
- $(call Image/Build/$(1),$(1))
+define Device/nas4220b
+ $(Device/nas4220b-sq201)
+ DEVICE_TITLE := Raidsonic NAS IB-4220-B
+endef
+TARGET_DEVICES += nas4220b
+
+define Device/rut1xx
+ DEVICE_TITLE := Teltonika RUT1xx
+ DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
+endef
+TARGET_DEVICES += rut1xx
+
+define Device/sq201
+ $(Device/nas4220b-sq201)
+ DEVICE_TITLE := ITian Square One SQ201
+ DEVICE_PACKAGES += rt61-pci usb2-pci
+endef
+TARGET_DEVICES += sq201
+
+define Device/wbd111
+ DEVICE_TITLE := Wiliboard WBD-111
+ KERNEL := kernel-bin | append-dtb | wbd-nops
+endef
+TARGET_DEVICES += wbd111
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 \
- -m GEOS -f 0x30000000 -z \
- -v WILI-S.WILIBOARD.v5.00.SL3512.OpenWrt.00000.000000.000000 \
- -o $(BIN_DIR)/openwrt-$(BOARD)-wbd111-$(1).bin \
- -p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/openwrt-$(BOARD)-wbd111-zImage \
- -p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/openwrt-$(BOARD)-$(1).img
+define Device/wbd222
+ DEVICE_TITLE := Wiliboard WBD-222
+ KERNEL := kernel-bin | append-dtb | wbd-nops
endef
+TARGET_DEVICES += wbd222
$(eval $(call BuildImage))