#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
qcom,saw = <&saw0>;
clocks = <&kraitcc 0>;
clock-names = "cpu";
+ qcom,imem = <&imem>;
clock-latency = <100000>;
core-supply = <&smb208_s2a>;
voltage-tolerance = <5>;
qcom,saw = <&saw1>;
clocks = <&kraitcc 1>;
clock-names = "cpu";
+ qcom,imem = <&imem>;
clock-latency = <100000>;
core-supply = <&smb208_s2b>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
operating-points-0-0 = <
/* kHz uV */
600000 800000
384000 775000
>;
- cooling-min-state = <0>;
- cooling-max-state = <10>;
- #cooling-cells = <2>;
};
L2: l2-cache {
ranges;
compatible = "simple-bus";
+ lpass@28100000 {
+ compatible = "qcom,lpass-cpu";
+ status = "disabled";
+ clocks = <&lcc AHBIX_CLK>,
+ <&lcc MI2S_OSR_CLK>,
+ <&lcc MI2S_BIT_CLK>;
+ clock-names = "ahbix-clk",
+ "mi2s-osr-clk",
+ "mi2s-bit-clk";
+ interrupts = <0 85 1>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x28100000 0x10000>;
+ reg-names = "lpass-lpaif";
+ };
+
imem: memory@700000 {
- compatible = "qcom,imem-ipq8064", "syscon";
+ compatible = "qcom,qfprom", "syscon";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ stride = <1>;
ranges = <0x0 0x00700000 0x1000>;
};
#address-cells = <1>;
#size-cells = <0>;
- smb208_s1a: smb208-s1a {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S1a>;
-
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
-
- qcom,switch-mode-frequency = <1200000>;
-
- };
-
- smb208_s1b: smb208-s1b {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S1b>;
-
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
-
- qcom,switch-mode-frequency = <1200000>;
- };
-
- smb208_s2a: smb208-s2a {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S2a>;
+ smb208_regulators {
+ compatible = "qcom,rpm-smb208-regulators";
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1275000>;
-
- qcom,switch-mode-frequency = <1400000>;
- };
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
- smb208_s2b: smb208-s2b {
- compatible = "qcom,rpm-smb208";
- reg = <QCOM_RPM_SMB208_S2b>;
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1275000>;
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1275000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
- qcom,switch-mode-frequency = <1400000>;
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1275000>;
+ qcom,switch-mode-frequency = <1200000>;
+ };
};
- cxo_clk: cxo-clk {
+ rpm_clocks {
#clock-cells = <0>;
compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_CXO_CLK>;
- qcom,rpm-clk-name = "cxo";
- qcom,rpm-clk-freq = <25000000>;
qcom,rpm-clk-active-only;
- };
- pxo_clk: pxo-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_PXO_CLK>;
- qcom,rpm-clk-name = "pxo";
- qcom,rpm-clk-freq = <25000000>;
- qcom,rpm-clk-active-only;
- };
+ cxo_clk: cxo {
+ reg = <QCOM_RPM_CXO_CLK>;
+ qcom,rpm-clk-name = "cxo";
+ qcom,rpm-clk-freq = <25000000>;
+ };
- ebi1_clk: ebi1-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_EBI1_CLK>;
- qcom,rpm-clk-name = "ebi1";
- qcom,rpm-clk-freq = <533000000>;
- qcom,rpm-clk-active-only;
- };
+ pxo_clk: pxo {
+ reg = <QCOM_RPM_PXO_CLK>;
+ qcom,rpm-clk-name = "pxo";
+ qcom,rpm-clk-freq = <25000000>;
+ };
- apps_fabric_clk: apps-fabric-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_APPS_FABRIC_CLK>;
- qcom,rpm-clk-name = "apps-fabric";
- qcom,rpm-clk-freq = <533000000>;
- qcom,rpm-clk-active-only;
- };
+ ebi1_clk: ebi1 {
+ reg = <QCOM_RPM_EBI1_CLK>;
+ qcom,rpm-clk-name = "ebi1";
+ qcom,rpm-clk-freq = <533000000>;
+ };
- nss_fabric0_clk: nss-fabric0-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_NSS_FABRIC_0_CLK>;
- qcom,rpm-clk-name = "nss-fabric0";
- qcom,rpm-clk-freq = <533000000>;
- qcom,rpm-clk-active-only;
- };
+ apps_fabric_clk: apps-fabric {
+ reg = <QCOM_RPM_APPS_FABRIC_CLK>;
+ qcom,rpm-clk-name = "apps-fabric";
+ qcom,rpm-clk-freq = <533000000>;
+ };
- nss_fabric1_clk: nss-fabric1-clk {
- #clock-cells = <0>;
- compatible = "qcom,rpm-clk";
- reg = <QCOM_RPM_NSS_FABRIC_1_CLK>;
- qcom,rpm-clk-name = "nss-fabric1";
- qcom,rpm-clk-freq = <266000000>;
- qcom,rpm-clk-active-only;
+ nss_fabric0_clk: nss-fabric0 {
+ reg = <QCOM_RPM_NSS_FABRIC_0_CLK>;
+ qcom,rpm-clk-name = "nss-fabric0";
+ qcom,rpm-clk-freq = <533000000>;
+ };
+
+ nss_fabric1_clk: nss-fabric1 {
+ reg = <QCOM_RPM_NSS_FABRIC_1_CLK>;
+ qcom,rpm-clk-name = "nss-fabric1";
+ qcom,rpm-clk-freq = <266000000>;
+ };
};
};
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
pcie0_pins: pcie0_pinmux {
mux {
regulator;
};
+ gsbi1: gsbi@12440000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <1>;
+ reg = <0x12440000 0x100>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart1: serial@12450000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12450000 0x1000>,
+ <0x12440000 0x1000>;
+ interrupts = <0 193 0x0>;
+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ interrupts = <0 194 0>;
+
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
};
};
+ gsbi6: gsbi@16500000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <6>;
+ reg = <0x16500000 0x100>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart6: serial@16540000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16540000 0x1000>,
+ <0x16500000 0x1000>;
+ interrupts = <0 156 0x0>;
+ clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@16580000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <0 157 0>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi@16580000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <0 157 0>;
+
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gsbi7: gsbi@16600000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <7>;
+ reg = <0x16600000 0x100>;
+ clocks = <&gcc GSBI7_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart7: serial@16640000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16640000 0x1000>,
+ <0x16600000 0x1000>;
+ interrupts = <0 158 0x0>;
+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@16680000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16680000 0x1000>;
+ interrupts = <0 159 0>;
+
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
sata_phy: sata-phy@1b400000 {
compatible = "qcom,ipq806x-sata-phy";
reg = <0x1b400000 0x200>;
#reset-cells = <1>;
};
+ lcc: clock-controller@28000000 {
+ compatible = "qcom,lcc-ipq8064";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-ipq8064", "syscon";
reg = <0x1a400000 0x100>;
gmac0: ethernet@37000000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37000000 0x200000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
gmac1: ethernet@37200000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37200000 0x200000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
gmac2: ethernet@37400000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37400000 0x200000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
gmac3: ethernet@37600000 {
device_type = "network";
- compatible = "qcom,ipq806x-gmac";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
reg = <0x37600000 0x200000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
projects / openwrt / openwrt.git / blobdiff