ipq806x: convert ok to okay in dts
[openwrt/openwrt.git] / target / linux / ipq806x / files-4.19 / arch / arm / boot / dts / qcom-ipq8064-r7500.dts
index b6505dd54120917ca33dcfecfb44519bd68fb506..975556756041603063db84238ae7f2a2be3b0220 100644 (file)
 
                gsbi@16300000 {
                        qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
+                       status = "okay";
                        serial@16340000 {
-                               status = "ok";
+                               status = "okay";
                        };
                        /*
                         * The i2c device on gsbi4 should not be enabled.
                };
 
                sata-phy@1b400000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                sata@29000000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8800 {          /* USB3 port 1 HS phy */
                        clocks = <&gcc USB30_0_UTMI_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@100f8830 {          /* USB3 port 1 SS phy */
                        clocks = <&gcc USB30_0_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8800 {          /* USB3 port 0 HS phy */
                        clocks = <&gcc USB30_1_UTMI_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                phy@110f8830 {          /* USB3 port 0 SS phy */
                        clocks = <&gcc USB30_1_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@0 {
                        clocks = <&gcc USB30_1_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                usb30@1 {
                        clocks = <&gcc USB30_0_MASTER_CLK>;
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie0: pci@1b500000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                pcie1: pci@1b700000 {
-                       status = "ok";
+                       status = "okay";
                        force_gen1 = <1>;
                };
 
                nand@1ac00000 {
-                       status = "ok";
+                       status = "okay";
 
                        pinctrl-0 = <&nand_pins>;
                        pinctrl-names = "default";
                };
 
                gmac1: ethernet@37200000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "rgmii";
                        qcom,id = <1>;
 
                };
 
                gmac2: ethernet@37400000 {
-                       status = "ok";
+                       status = "okay";
                        phy-mode = "sgmii";
                        qcom,id = <2>;
 
 };
 
 &adm_dma {
-       status = "ok";
+       status = "okay";
 };