model = "FRITZ3370 - Fritz!Box WLAN 3370";
chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
+ bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
+
+ leds {
+ boot = &power_green;
+ failsafe = &power_red;
+ running = &power_green;
+
+ dsl = &dsl;
+ internet = &info_green;
+ wifi = &wifi;
+ };
};
memory@0 {
reg = <0x0 0x8000000>;
};
-
+
fpi@10000000 {
localbus@0 {
nand-parts@0 {
partition@0 {
label = "kernel";
- reg = <0x00000 0x400000>;
+ reg = <0x0 0x400000>;
};
partition@400000 {
- label = "rootfs";
+ label = "rootfs_ubi";
reg = <0x400000 0x3000000>;
};
};
};
- spi@E100800 {
- compatible = "lantiq,spi-xway-broken";
- reg = <0xE100800 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <22 23 24>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fl129p0";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <1000000>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "ENV_MAC";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "DPF";
- read-only;
- };
-
- partition@40000 {
- reg = <0x40000 0x10000>;
- label = "NVRAM";
- read-only;
- };
-
- partition@500000 {
- reg = <0x50000 0x003a0000>;
- label = "kernel";
- };
- };
- };
-
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
lantiq,groups = "spi", "spi_cs4";
lantiq,function = "spi";
};
- nand_out {
- lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
- lantiq,function = "ebu";
- lantiq,direction = <1>;
- lantiq,pull = <0>;
- };
- nand_in {
- lantiq,groups = "nand rdy";
- lantiq,function = "ebu";
- lantiq,direction = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
+ nand {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd", "nand cs1", "nand rdy";
+ lantiq,function = "ebu";
+ lantiq,pull = <1>;
+ };
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,c45-reg-init = <1 0 0 0>;
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,c45-reg-init = <1 0 0 0>;
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,c45-reg-init = <1 0 0 0>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,c45-reg-init = <1 0 0 0>;
};
};
};
};
};
+ ath9k_eep {
+ compatible = "ath9k,eeprom";
+ ath,eep-flash = <&ath9k_cal 0x985>;
+ ath,eep-endian;
+ ath,eep-swap;
+ };
+
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";
label = "power";
gpios = <&gpio 1 0>;
linux,code = <0x100>;
- };
+ };
/* wifi {
label = "wifi";
gpios = <&gpio 29 0>;
gpio-leds {
compatible = "gpio-leds";
-
- power {
- label = "power";
+
+ power_green: power {
+ label = "fritz3370:green:power";
gpios = <&gpio 32 1>;
+ default-state = "keep";
};
- power2 {
- label = "power2";
+ power_red: power2 {
+ label = "fritz3370:red:power";
gpios = <&gpio 33 1>;
};
info_red {
- label = "info_red";
+ label = "fritz3370:red:info";
gpios = <&gpio 34 1>;
};
- wifi {
- label = "wifi";
+ wifi: wifi {
+ label = "fritz3370:green:wlan";
gpios = <&gpio 35 1>;
};
- dsl {
- label = "dsl";
+ dsl: dsl {
+ label = "fritz3370:green:dsl";
gpios = <&gpio 36 1>;
};
lan {
- label = "lan";
+ label = "fritz3370:green:lan";
gpios = <&gpio 38 1>;
};
- info_green {
- label = "info_green";
+ info_green: info_green {
+ label = "fritz3370:green:info";
gpios = <&gpio 47 1>;
};
};
};
+
+&spi {
+ status = "ok";
+
+ m25p80@3 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <3 0>;
+ spi-max-frequency = <1000000>;
+
+ ath9k_cal: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "urlader";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+};