kernel: update kernel 4.4 to 4.4.61
[openwrt/openwrt.git] / target / linux / lantiq / dts / P2812HNUFX.dtsi
index 30eee502d0ba51e7067bbaad7f4ef2ec24a44a66..cc133f65ff177e75c3e236da644ed50fc7e516ec 100644 (file)
@@ -1,8 +1,10 @@
-/include/ "vr9.dtsi"
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "console=ttyLTQ0,115200";
        };
 
        aliases {
                led-wifi = &wireless_green;
        };
 
-       cputemp@0 {
-               compatible = "lantiq,cputemp";
-       };
-
        memory@0 {
                reg = <0x0 0x8000000>;
        };
 
-        fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xEEFFFFF>;
-               reg = <0x10000000 0xEF00000>;
-
-               localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-                               1 0 0x4000000 0x4000010>; /* addsel1 */
-                       compatible = "lantiq,localbus", "simple-bus";
-               };
-
+       fpi@10000000 {
                gpio: pinmux@E100B10 {
-                       compatible = "lantiq,pinctrl-xr9";
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;
 
-                       interrupt-parent = <&icu0>;
-                       interrupts = <166 135 66 40 41 42 38>;
-
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xE100B10 0xA0>;
-
                        state_default: pinmux {
                                exin3 {
                                        lantiq,groups = "exin3";
 
                ifxhcd@E101000 {
                        status = "okay";
-                       gpios = <&gpio 33 0>;
+                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
                        lantiq,portmask = <0x3>;
                };
 
                ifxhcd@E106000 {
                        status = "okay";
-                       gpios = <&gpio 33 0>;
+                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
                };
 
                pci@E105400 {
                        status = "okay";
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-                               0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xE105400 0x400>;       /* pci bridge */
-                       lantiq,bus-clock = <33333333>;
-                       /*lantiq,external-clock;*/
-                       lantiq,delay-hi = <0>; /* 0ns delay */
-                       lantiq,delay-lo = <0>; /* 0.0ns delay */
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <
-                               0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
-                               >;
-                       gpio-reset = <&gpio 21 0>;
-                       req-mask = <0x1>;       /* GNT1 */
+                       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
                };
        };
 
 
                reset {
                        label = "reset";
-                       gpios = <&gpio 39 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio 1 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
        };
 
 
                internet_red {
                        label = "p2812hnufx:red:internet";
-                       gpios = <&stp 16 1>;
+                       gpios = <&stp 16 GPIO_ACTIVE_LOW>;
                };
                internet_green: internet_green {
                        label = "p2812hnufx:green:internet";
-                       gpios = <&stp 17 1>;
+                       gpios = <&stp 17 GPIO_ACTIVE_LOW>;
                };
                dsl_green: dsl_green {
                        label = "p2812hnufx:green:dsl";
-                       gpios = <&stp 18 1>;
+                       gpios = <&stp 18 GPIO_ACTIVE_LOW>;
                };
                dsl_orange {
                        label = "p2812hnufx:orange:dsl";
-                       gpios = <&stp 19 1>;
+                       gpios = <&stp 19 GPIO_ACTIVE_LOW>;
                };
                wireless_orange {
                        label = "p2812hnufx:orange:wlan";
-                       gpios = <&stp 20 1>;
+                       gpios = <&stp 20 GPIO_ACTIVE_LOW>;
                };
                wireless_green: wireless_green {
                        label = "p2812hnufx:green:wlan";
-                       gpios = <&stp 21 1>;
+                       gpios = <&stp 21 GPIO_ACTIVE_LOW>;
                };
                power_red: power {
                        label = "p2812hnufx:red:power";
-                       gpios = <&stp 22 1>;
+                       gpios = <&stp 22 GPIO_ACTIVE_LOW>;
                };
                power_green: power2 {
                        label = "p2812hnufx:green:power";
-                       gpios = <&stp 23 1>;
+                       gpios = <&stp 23 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                phone1 {
                        label = "p2812hnufx:green:phone";
-                       gpios = <&gpio 11 1>;
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
                phone1warn {
                        label = "p2812hnufx:orange:phone";
-                       gpios = <&gpio 12 1>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
                phone2warn {
                        label = "p2812hnufx:orange:phone2";
-                       gpios = <&gpio 26 1>;
+                       gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
                };
                phone2 {
                        label = "p2812hnufx:green:phone2";
-                       gpios = <&gpio 28 1>;
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                };
        };
 };