-/include/ "vr9.dtsi"
+#include "vr9.dtsi"
-/ {
- model = "VGV7510KW22 - o2 Box 6431";
+#include <dt-bindings/input/input.h>
+/ {
chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
- leds {
- boot = &power_green;
- failsafe = &power_red;
- running = &power_green;
+ led-dsl = &dsl;
+ led-internet = &internet_green;
+ led-wifi = &wifi;
+ };
- dsl = &dsl;
- internet = &internet_green;
- wifi = &wifi;
+ sram@1F000000 {
+ vmmc@107000 {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
};
};
pinctrl-0 = <&state_default>;
state_default: pinmux {
- ip101a-rst {
- lantiq,pins = "io46";
- lantiq,output = <0>;
- lantiq,pull = <1>;
- };
gphy-leds {
- lantiq,groups = "gphy0 led1",
+ lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy1 led0", "gphy1 led1";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
lantiq,pull = <2>;
- lantiq,open-drain = <0>;
lantiq,output = <1>;
};
mdio {
lantiq,pull = <0>;
lantiq,output = <1>;
};
- spi {
- lantiq,groups = "spi_di", "spi_do", "spi_clk";
- lantiq,function = "spi";
- };
};
};
- stp: stp@E100BB0 {
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xE100BB0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- lantiq,shadow = <0xff>;
- lantiq,groups = <0x1>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x7>;
- lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
- };
-
ifxhcd@E101000 {
status = "okay";
- gpios = <&gpio 47 0>;
- };
-
- pci@E105400 {
- status = "okay";
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
- >;
- gpio-reset = <&gpio 21 0>;
- req-mask = <0x1>; /* GNT1 */
+ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
phys = [ 00 01 ];
};
- ralink_eep {
- compatible = "ralink,eeprom";
- ralink,eeprom = "RT3062.eeprom";
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
reset {
label = "reset";
- gpios = <&gpio 6 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio 9 1>;
- linux,code = <0x211>;
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
dsl: dsl {
label = "vgv7510kw22:green:dsl";
- gpios = <&gpio 2 1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "vgv7510kw22:red:internet";
- gpios = <&gpio 10 1>;
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
info_red {
label = "vgv7510kw22:red:info";
- gpios = <&gpio 12 1>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
power_green: power {
label = "vgv7510kw22:green:power";
- gpios = <&gpio 14 1>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
info_green {
label = "vgv7510kw22:green:info";
- gpios = <&gpio 15 1>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "vgv7510kw22:green:internet";
- gpios = <&gpio 19 1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "vgv7510kw22:green:wlan";
- gpios = <&gpio 20 1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
power_red: power2 {
label = "vgv7510kw22:red:power";
- gpios = <&gpio 28 1>;
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
phone {
label = "vgv7510kw22:green:telefon";
- gpios = <&gpio 29 1>;
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
};
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
ð0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+ };
+
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";