lantiq: add compatible strings to dts files

[openwrt/openwrt.git] / target / linux / lantiq / dts / WBMR.dts

diff --git a/target/linux/lantiq/dts/WBMR.dts b/target/linux/lantiq/dts/WBMR.dts
index 60a750891715d4a64fd7f5b9562cf5020571ff41..9711a31cb2f9c1715a13dccb19bcdf6cff521ae8 100644 (file)
--- a/target/linux/lantiq/dts/WBMR.dts
+++ b/target/linux/lantiq/dts/WBMR.dts
@@ -1,12 +1,26 @@
 /dts-v1/;
 
-/include/ "ar9.dtsi"
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
+       compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
        model = "WBMR - Buffalo WBMR-HP-G300H";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
+
+               led-dsl = &dsl;
+               led-internet = &online_green;
+               led-usb = &usb;
+               led-wifi = &wifi;
        };
 
        memory@0 {
@@ -22,40 +36,41 @@
                                #address-cells = <1>;
                                #size-cells = <1>;
 
-                               partition@0 {
-                                       label = "uboot";
-                                       reg = <0x00000 0x40000>;
-                                       read-only;
-                               };
-
-                               partition@40000 {
-                                       label = "uboot_env";
-                                       reg = <0x40000 0x20000>;
-                                       read-only;
-                               };
-
-                               partition@20000 {
-                                       label = "firmware";
-                                       reg = <0x60000 0x1f20000>;
-                               };
-
-                               partition@0x1fc0000 {
-                                       label = "board";
-                                       reg = <0x1fc0000 0x20000>;
-                                       read-only;
-                               };
-
-                               partition@0x1fe0000 {
-                                       label = "calibration";
-                                       reg = <0x1fe0000 0x20000>;
-                                       read-only;
+                               partitions {
+                                       compatible = "fixed-partitions";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       partition@0 {
+                                               label = "uboot";
+                                               reg = <0x00000 0x40000>;
+                                               read-only;
+                                       };
+
+                                       partition@40000 {
+                                               label = "uboot_env";
+                                               reg = <0x40000 0x20000>;
+                                               read-only;
+                                       };
+
+                                       partition@20000 {
+                                               label = "firmware";
+                                               reg = <0x60000 0x1f20000>;
+                                       };
+
+                                       boardconfig: partition@1fc0000 {
+                                               label = "board";
+                                               reg = <0x1fc0000 0x20000>;
+                                               read-only;
+                                       };
+
+                                       partition@1fe0000 {
+                                               label = "calibration";
+                                               reg = <0x1fe0000 0x20000>;
+                                               read-only;
+                                       };
                                };
                        };
-
-                       mac_addr {
-                               compatible = "lantiq,eth-mac";
-                               reg = <0 0x1fd0024 0x6>;
-                       };
                };
 
                gpio: pinmux@E100B10 {
@@ -84,11 +99,12 @@
 
                etop@E180000 {
                        phy-mode = "rgmii";
+                       mtd-mac-address = <&boardconfig 0x10024>;
                };
 
                ifxhcd@E101000 {
                        status = "okay";
-                       gpios = <&gpio 36 0>;
+                       gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
                };
 
                pci@E105400 {
@@ -104,64 +120,65 @@
 
                wps {
                        label = "wps";
-                       gpios = <&gpio 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
                reset {
                        label = "reset";
-                       gpios = <&gpio 37 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
                eject {
                        label = "eject";
-                       gpios = <&gpio 34 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_EJECTCD>;
                };
                movie {
                        label = "movie";
-                       gpios = <&gpio 22 1>;
-                       linux,code = <0x109>;
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VIDEO>;
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               power {
-                       label = "power";
-                       gpios = <&gpio 1 1>;
+               power_green: power {
+                       label = "wbmr:green:power";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
                };
-               power2 {
-                       label = "power2";
-                       gpios = <&gpio 5 1>;
+               power_red: power2 {
+                       label = "wbmr:red:power";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                };
                security {
-                       label = "security";
-                       gpios = <&gpio 14 1>;
+                       label = "wbmr:yellow:security";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
-               wifi {
-                       label = "wifi";
-                       gpios = <&gpio 15 1>;
+               wifi: wifi {
+                       label = "wbmr:green:wireless";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
-               dsl {
-                       label = "dsl";
-                       gpios = <&gpio 16 1>;
+               dsl: dsl {
+                       label = "wbmr:green:dsl";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
-               online {
-                       label = "online";
-                       gpios = <&gpio 17 1>;
+               online_green: online {
+                       label = "wbmr:green:internet";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                };
                online2 {
-                       label = "online2";
-                       gpios = <&gpio 18 1>;
+                       label = "wbmr:red:internet";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };
                movie {
-                       label = "movie";
-                       gpios = <&gpio 20 1>;
+                       label = "wbmr:blue:movie";
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
-               usb {
-                       label = "usb";
-                       gpios = <&gpio 28 1>;
+               usb: usb {
+                       label = "wbmr:green:usb";
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
        };