lantiq: kernel 4.14: cleanup dts files
[openwrt/staging/jogo.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / ARV7506PW11.dts
index 3ec4bf41a05c2da314ed172b42e6c45bae3ec807..0c251c61ff1099559d2bbc948771617977b5aff3 100644 (file)
                reg = <0x0 0x4000000>;
        };
 
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x800000>;
-
-                               partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       partition@0 {
-                                               label = "uboot";
-                                               reg = <0x00000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       partition@40000 {
-                                               label = "uboot_env";
-                                               reg = <0x40000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       partition@50000 {
-                                               label = "firmware";
-                                               reg = <0x50000 0x7a0000>;
-                                       };
-
-                                       boardconfig: partition@7f0000 {
-                                               label = "board_config";
-                                               reg = <0x7f0000 0x10000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-               };
-
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               pci {
-                                       lantiq,groups = "gnt1";
-                                       lantiq,function = "pci";
-                                       lantiq,output = <1>;
-                               };
-                               pci_rst {
-                                       lantiq,pins = "io21";
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <1>;
-                               };
-                       };
-               };
-
-               /* GPIO 19: switch reset */
-               etop@E180000 {
-                       phy-mode = "rmii";
-                       mtd-mac-address = <&boardconfig 0x16>;
-               };
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
        };
 };
 
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               pci {
+                       lantiq,groups = "gnt1";
+                       lantiq,function = "pci";
+                       lantiq,output = <1>;
+               };
+               pci_rst {
+                       lantiq,pins = "io21";
+                       lantiq,pull = <2>;
+                       lantiq,output = <1>;
+               };
+       };
+};
+
+/* GPIO 19: switch reset */
+&gsw {
+       phy-mode = "rmii";
+       mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+       nor@0 {
+               compatible = "lantiq,nor";
+               bank-width = <2>;
+               reg = <0 0x0 0x800000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x00000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "uboot_env";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7a0000>;
+                       };
+
+                       boardconfig: partition@7f0000 {
+                               label = "board_config";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
 &pci0 {
        status = "okay";
        lantiq,external-clock;