ramips: add support for Netgear R6120

[openwrt/staging/mkresin.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7b624090c34137fa1554d220870c5dfdea310b8b..28bf815ee9afb60f38b570fb384c8d563598605b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -49,14 +49,17 @@ ramips_setup_interfaces()
        dcs-930|\
        dcs-930l-b1|\
        ht-tm02|\
+       kimax,u35wf|\
        linkits7688 | \
        m2m|\
        microwrt|\
+       mikrotik,rbm11g|\
        mpr-a2|\
        ncs601w|\
        omega2 | \
        omega2p | \
        timecloud|\
+       tplink,tl-wa801nd-v5|\
        w150m|\
        widora,neo-16m|\
        widora,neo-32m|\
@@ -100,6 +103,7 @@ ramips_setup_interfaces()
        mzk-750dhp|\
        mzk-w300nh2|\
        d-team,newifi-d2|\
+       netgear,r6120|\
        nixcore-x1-8M|\
        nixcore-x1-16M|\
        oy-0001|\
@@ -217,7 +221,8 @@ ramips_setup_interfaces()
        wrtnode2p | \
        wrtnode2r | \
        youhua,wr1200js|\
-       zbt-wa05)
+       zbt-wa05|\
+       zyxel,keenetic-extra-ii)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
@@ -228,6 +233,8 @@ ramips_setup_interfaces()
                ;;
        dir-860l-b1|\
        elecom,wrc-1167ghbk2-s|\
+       elecom,wrc-2533gst|\
+       iodata,wn-ax1167gr|\
        iodata,wn-gx300gr)
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
@@ -335,6 +342,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
+       br-6478ac-v2|\
        tplink,c2-v1)
                ucidef_add_switch "switch1" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
@@ -440,6 +448,10 @@ ramips_setup_macs()
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(mtd_get_mac_binary devdata 7)
                ;;
+       br-6478ac-v2)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               wan_mac=$(macaddr_add "$lan_mac" 2)
+               ;;
        cy-swr1100|\
        dch-m225)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
@@ -461,6 +473,7 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
        elecom,wrc-1167ghbk2-s|\
+       elecom,wrc-2533gst|\
        sk-wb8)
                wan_mac=$(mtd_get_mac_binary factory 57350)
                ;;
@@ -475,6 +488,7 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-ax1167gr|\
        iodata,wn-gx300gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
                ;;