ramips: add support for Youku YK-L2

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 9f656199a838d001d14fc9869c08e22a3b7b8dda..5fcf437fbd23f0e93a56181fa9d88f374fba67ce 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -130,6 +130,7 @@ ramips_setup_interfaces()
        mqmaker,witi-512m|\
        wndr3700v5|\
        youku-yk1|\
+       youku,yk-l2|\
        zbt-ape522ii|\
        zbt-we1326|\
        zbtlink,zbt-we3526|\
@@ -366,6 +367,7 @@ ramips_setup_interfaces()
                        "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
                ;;
        dlink,dir-510l|\
+       netgear,ex6150|\
        re350-v1)
                ucidef_add_switch "switch0" \
                        "0:lan" "6@eth0"
@@ -451,6 +453,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan:2" "1:lan:1" "4:wan" "6@eth0"
                ;;
+       zyxel,keenetic-start)
+               ucidef_add_switch "switch0" \
+                       "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0"
+               ;;
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -659,6 +665,9 @@ ramips_setup_macs()
        xiaomi,mir3p)
                lan_mac=$(mtd_get_mac_binary Factory 0xe006)
                ;;
+       zyxel,keenetic-start)
+               wan_mac=$(mtd_get_mac_binary factory 40)
+               ;;
        *)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)