/dts-v1/;
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "3G150B", "ralink,rt5350-soc";
+ compatible = "tenda,3g150b", "ralink,rt5350-soc";
model = "Tenda 3G150B";
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fl064k";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- gpio1: gpio@660 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- ralink,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
+ aliases {
+ led-boot = &led_ap;
+ led-failsafe = &led_ap;
+ led-running = &led_ap;
+ led-upgrade = &led_ap;
};
gpio-leds {
compatible = "gpio-leds";
- ap {
- label = "tenda:blue:ap";
- gpios = <&gpio0 7 1>;
+ led_ap: ap {
+ label = "3g150b:blue:ap";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
3g {
- label = "tenda:blue:3g";
- gpios = <&gpio0 14 1>;
+ label = "3g150b:blue:3g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 0 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
};
};
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};