ramips: fix mt7628 eval board pinmux

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / AWM002-EVB-4M.dts

diff --git a/target/linux/ramips/dts/AWM002-EVB-4M.dts b/target/linux/ramips/dts/AWM002-EVB-4M.dts
index f647a9658c2aa70a794e3ec90767e175c7ed7c62..b1394405f0b36249f41130d288d29b37a0ca1a7e 100644 (file)
--- a/target/linux/ramips/dts/AWM002-EVB-4M.dts
+++ b/target/linux/ramips/dts/AWM002-EVB-4M.dts
@@ -1,55 +1,43 @@
 /dts-v1/;
 
-#include "AWM002-4M.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "AWM002-EVB.dtsi"
 
 / {
-       model = "AsiaRF AWM002 EVB";
-
-       gpio-leds {
-               compatible = "gpio-leds";
+       compatible = "asiarf,awm002-evb-4m", "ralink,rt5350-soc";
+       model = "AsiaRF AWM002 EVB (4M)";
+};
 
-               tx {
-                       label = "awm002-evb:green:tx";
-                       gpios = <&gpio0 15 1>;
-               };
+&spi0 {
+       status = "okay";
 
-               rx {
-                       label = "awm002-evb:green:rx";
-                       gpios = <&gpio0 16 1>;
+       m25p80: m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
                };
 
-               wps {
-                       label = "awm002-evb:green:wps";
-                       gpios = <&gpio0 21 1>;
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
                };
-       };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset_wps {
-                       label = "reset_wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <KEY_RESTART>;
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
                };
 
-               mode {
-                       label = "mode";
-                       gpios = <&gpio0 20 1>;
-                       linux,code = <ABS_MT_WIDTH_MAJOR>;
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
                };
        };
 };
-
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};