ramips: improve Skylab SKW92A support

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / ArcherC50V3.dts

diff --git a/target/linux/ramips/dts/ArcherC50V3.dts b/target/linux/ramips/dts/ArcherC50V3.dts
index 93d9a34ccf588a125e3fe93f49bc90077d2e3da5..423ac88c2bcf826587f28b230f74b3fb54f09128 100644 (file)
--- a/target/linux/ramips/dts/ArcherC50V3.dts
+++ b/target/linux/ramips/dts/ArcherC50V3.dts
@@ -10,13 +10,14 @@
        model = "TP-Link Archer C50 v3";
 
        aliases {
-               led-status = &led_power;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -84,15 +85,14 @@
 
 &pcie {
        status = "okay";
+};
 
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x28000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-                       mtd-mac-address = <&factory 0xf100>;
-                       mtd-mac-address-increment = <(-1)>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x28000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               mtd-mac-address = <&factory 0xf100>;
+               mtd-mac-address-increment = <(-1)>;
        };
 };