/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "BROADWAY", "ralink,rt3052-soc";
+ compatible = "hauppauge,broadway", "ralink,rt3052-soc";
model = "Hauppauge Broadway";
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
- };
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- esw@10110000 {
- ralink,portmap = <0x3e>;
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+ };
};
gpio-leds {
compatible = "gpio-leds";
+
diskmounted {
- label = "red:diskmounted";
- gpios = <&gpio0 9 1>;
+ label = "broadway:red:diskmounted";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
};
+
wps_active {
- label = "red:wps_active";
- gpios = <&gpio0 14 1>;
+ label = "broadway:red:wps_active";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
+
factory {
label = "Factory Reset button";
- gpios = <&gpio0 13 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};