ramips: set usb led trigger via devicetree

[openwrt/openwrt.git] / target / linux / ramips / dts / CF-WR800N.dts

diff --git a/target/linux/ramips/dts/CF-WR800N.dts b/target/linux/ramips/dts/CF-WR800N.dts
index 913f142f3528490ca59cbfada1990a9c5e566e1c..8c577852776dca31bb5ac70cdd792b879bf5a4b3 100644 (file)
--- a/target/linux/ramips/dts/CF-WR800N.dts
+++ b/target/linux/ramips/dts/CF-WR800N.dts
@@ -2,10 +2,17 @@
 
 #include "mt7620n.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "cf-wr800n", "ralink,mt7620n-soc";
+       compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
        model = "Comfast CF-WR800N";
 
+       aliases {
+               led-status = &led_wps;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
@@ -15,30 +22,28 @@
 
                ethernet {
                        label = "cf-wr800n:white:ethernet";
-                       gpios = <&gpio2 4 1>;
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
                        label = "cf-wr800n:white:wifi";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
 
-               wps {
+               led_wps: wps {
                        label = "cf-wr800n:white:wps";
-                       gpios = <&gpio1 15 1>;
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 };
@@ -63,34 +68,37 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "w25q64";
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
 };