#include "rt3883.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
- compatible = "CY-SWR1100", "ralink,rt3883-soc";
+ compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
model = "Samsung CY-SWR1100";
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ };
+
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
- partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
- partition@40000 {
- label = "devdata";
- reg = <0x40000 0x10000>;
- };
+ partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partition@40000 {
+ label = "devdata";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
rtl8367 {
compatible = "realtek,rtl8367";
- gpio-sda = <&gpio0 1 0>;
- gpio-sck = <&gpio0 2 0>;
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
- gpios = <&gpio0 6 1>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 3 1>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
- wps {
+ led_wps: wps {
label = "cy-swr1100:blue:wps";
- gpios = <&gpio0 0 1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
usb {
label = "cy-swr1100:blue:usb";
- gpios = <&gpio1 1 1>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
};
};
&pci {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
+};
- host-bridge {
- pci-bridge@1 {
- status = "okay";
+&pci1 {
+ status = "okay";
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x10000 0 0 0 0>;
- ralink,5ghz = <0>;
- ralink,mtd-eeprom = <&factory 0x2000>;
- };
- };
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x10000 0 0 0 0>;
+ ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0x2000>;
};
};