kernel: mtdsplit: Add support for D-link JBOOT

[openwrt/openwrt.git] / target / linux / ramips / dts / CY-SWR1100.dts

diff --git a/target/linux/ramips/dts/CY-SWR1100.dts b/target/linux/ramips/dts/CY-SWR1100.dts
index 2e0af387bd58e126f9effbc266ae628c27473e5b..b5b594bf59ae421cc24a4d6727a2305e91e03804 100644 (file)
--- a/target/linux/ramips/dts/CY-SWR1100.dts
+++ b/target/linux/ramips/dts/CY-SWR1100.dts
@@ -1,69 +1,17 @@
 /dts-v1/;
 
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "CY-SWR1100", "ralink,rt3883-soc";
+       compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
        model = "Samsung CY-SWR1100";
 
-       palmbus@10000000 {
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "spi";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x66>;
-               port@0 {
-                       ralink,fixed-link = <1000 1 1 1>;
-               };
-       };
-
-       pci@10140000 {
-               status = "okay";
-
-               pinctrl-names = "default";
-               pinctrl-0 = <&pci_pins>;
-               pci_pins: pci {
-                       pci {
-                               ralink,group = "pci";
-                               ralink,function = "pci-fnc";
-                       };
-               };
-
-               host-bridge {
-                       pci-bridge@1 {
-                               status = "okay";
-                       };
-               };
-       };
-
-       wmac@10180000 {
-               status = "okay";
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
-       ehci@101c0000 {
-               status = "okay";
-       };
-
-       ohci@101c1000 {
-               status = "okay";
-       };
-
        nor-flash@1c000000 {
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
-
                bank-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
@@ -73,25 +21,30 @@
                        reg = <0x0 0x30000>;
                        read-only;
                };
+
                partition@30000 {
                        label = "uboot-env";
                        reg = <0x30000 0x4000>;
                        read-only;
                };
+
                factory: partition@34000 {
                        label = "factory";
                        reg = <0x34000 0x4000>;
                        read-only;
                };
+
                partition@38000 {
                        label = "nvram";
                        reg = <0x38000 0x8000>;
                        read-only;
                };
+
                partition@40000 {
                        label = "devdata";
                        reg = <0x40000 0x10000>;
                };
+
                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x7b0000>;
@@ -100,8 +53,8 @@
 
        rtl8367 {
                compatible = "realtek,rtl8367";
-               gpio-sda = <&gpio0 1 0>;
-               gpio-sck = <&gpio0 2 0>;
+               gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
                realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
        };
 
@@ -110,27 +63,91 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 6 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
+
                wps {
                        label = "wps";
-                       gpios = <&gpio0 3 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wps {
-                       label = "samsung:blue:wps";
-                       gpios = <&gpio0 0 1>;
+                       label = "cy-swr1100:blue:wps";
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                };
+
                usb {
-                       label = "samsung:blue:usb";
-                       gpios = <&gpio1 1 1>;
+                       label = "cy-swr1100:blue:usb";
+                       gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "spi";
+                       ralink,function = "gpio";
                };
        };
 };
+
+&ethernet {
+       port@0 {
+               mediatek,fixed-link = <1000 1 1 1>;
+               phy-mode = "rgmii";
+       };
+};
+
+&pci {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pci_pins>;
+
+       pci_pins: pci {
+               pci {
+                       ralink,group = "pci";
+                       ralink,function = "pci-fnc";
+               };
+       };
+
+       host-bridge {
+               pci-bridge@1 {
+                       status = "okay";
+
+                       wifi@0,0 {
+                               compatible = "pci0,0";
+                               reg = <0x10000 0 0 0 0>;
+                               ralink,5ghz = <0>;
+                               ralink,mtd-eeprom = <&factory 0x2000>;
+                       };
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+       ralink,2ghz = <0>;
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};