#include "rt3050.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "DAP-1350", "ralink,rt3052-soc";
+ compatible = "dlink,dap-1350", "ralink,rt3052-soc";
model = "D-Link DAP-1350";
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ };
+
chosen {
bootargs = "console=ttyS0,115200";
};
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x30000>;
- read-only;
- };
-
- partition@70000 {
- label = "devlang";
- reg = <0x70000 0x40000>;
- read-only;
- };
- partition@b0000 {
- label = "firmware";
- reg = <0xb0000 0x750000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x30000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "devlang";
+ reg = <0x70000 0x40000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "firmware";
+ reg = <0xb0000 0x750000>;
+ };
};
};
gpio-leds {
compatible = "gpio-leds";
- power {
+ led_power_blue: power {
label = "dap-1350:blue:power";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power2 {
label = "dap-1350:red:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wps {
label = "dap-1350:blue:wps";
- gpios = <&gpio0 14 1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
rt {
label = "rt";
- gpios = <&gpio0 11 1>;
- linux,code = <0x100>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
};
ap {
label = "ap";
- gpios = <&gpio0 7 1>;
- linux,code = <0x101>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
};
};
};