#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
model = "D-Link DCH-M225";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
- gpios = <&gpio0 11 1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
- gpios = <&gpio1 2 1>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
- power {
+ led_power: power {
label = "dch-m225:green:power";
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
};
status {
label = "dch-m225:red:status";
- gpios = <&gpio1 0 1>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
};
"Headphones", "HP_L",
"Headphones", "HP_R";
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,hp-det-gpio = <&gpio0 14 1>;
+ simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
simple-audio-card,cpu {
sound-dai = <&i2s>;
#sound-dai-cells = <0>;
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&gpio_i2s_pins>, <&wm8960_mclk_pins>;
+ pinctrl-0 = <&mdio_refclk_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80";
spi-max-frequency = <80000000>;
m25p,fast-read;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
- nvram: partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
+ nvram: partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
- partition@50000 {
- label = "upgrade_rec";
- reg = <0x50000 0x100000>;
- read-only;
- };
+ partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- partition@150000 {
- label = "firmware";
- reg = <0x150000 0x6b0000>;
+ partition@50000 {
+ label = "upgrade_rec";
+ reg = <0x50000 0x100000>;
+ read-only;
+ };
+
+ partition@150000 {
+ label = "firmware";
+ reg = <0x150000 0x6b0000>;
+ };
};
};
};
ralink,function = "gpio";
};
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
-
- wm8960_mclk_pins: wm8960_mclk {
- wm8960_mclk {
- ralink,group = "mdio";
- ralink,function = "refclk";
- };
+ gpio_i2s {
+ ralink,group = "uartf";
+ ralink,function = "gpio i2s";
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
};
-