gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
wps {
led_power: power {
label = "dch-m225:green:power";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ default-state = "on";
};
status {
label = "dch-m225:red:status";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
m25p,fast-read;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x4000>;
- read-only;
- };
-
- factory: partition@34000 {
- label = "factory";
- reg = <0x34000 0x4000>;
- read-only;
- };
-
- nvram: partition@38000 {
- label = "nvram";
- reg = <0x38000 0x8000>;
- read-only;
- };
-
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "upgrade_rec";
- reg = <0x50000 0x100000>;
- read-only;
- };
-
- partition@150000 {
- label = "firmware";
- reg = <0x150000 0x6b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x4000>;
+ read-only;
+ };
+
+ factory: partition@34000 {
+ label = "factory";
+ reg = <0x34000 0x4000>;
+ read-only;
+ };
+
+ nvram: partition@38000 {
+ label = "nvram";
+ reg = <0x38000 0x8000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "upgrade_rec";
+ reg = <0x50000 0x100000>;
+ read-only;
+ };
+
+ partition@150000 {
+ label = "firmware";
+ reg = <0x150000 0x6b0000>;
+ };
};
};
};