ramips: improve Skylab SKW92A support

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / DIR-615-D.dts

diff --git a/target/linux/ramips/dts/DIR-615-D.dts b/target/linux/ramips/dts/DIR-615-D.dts
index c40d5727b60fd29aa2354461bf2d71d0f970fde1..ba49331756711781bd06b393281f136d0e592e08 100644 (file)
--- a/target/linux/ramips/dts/DIR-615-D.dts
+++ b/target/linux/ramips/dts/DIR-615-D.dts
@@ -10,7 +10,10 @@
        model = "D-Link DIR-615 D";
 
        aliases {
-               led-status = &led_status_green;
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_green;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_green;
        };
 
        cfi@1f000000 {
@@ -18,30 +21,34 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               devdata: partition@30000 {
-                       label = "devdata";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               partition@40000 {
-                       label = "devconf";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       devdata: partition@30000 {
+                               label = "devdata";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "devconf";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 
@@ -68,11 +75,13 @@
                status {
                        label = "dir-615-d:amber:status";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
                };
 
                led_status_green: status2 {
                        label = "dir-615-d:green:status";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
                };
 
                wan {