/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "F5D8235_V1", "ralink,rt2880-soc";
+ compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
model = "Belkin F5D8235 v1";
- pci@440000 {
- status = "ok";
+ aliases {
+ led-boot = &led_wired_blue;
+ led-failsafe = &led_wired_blue;
};
cfi@1f000000 {
reg = <0xbc400000 0x800000>;
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
0x800D 0x00FF
0xBE4D 0x00FF
>;
+
+ realtek,green-ethernet-features;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
wps {
storage {
label = "f5d8235-v1:blue:storage";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
storage2 {
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
- wired {
+ led_wired_blue: wired {
label = "f5d8235-v1:blue:wired";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
};
};
+&pci {
+ status = "okay";
+
+ usb@11,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "pci1033,0035";
+ reg = <0x8800 0 0 0 0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+
+ usb@11,1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "pci1033,00e0";
+ reg = <0x8900 0 0 0 0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+};
+
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;