/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "FREESTATION5", "ralink,rt3052-soc";
+ compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
model = "ARC FreeStation5";
- memorydetect {
- ralink,memory = <0x0 0x200000 0x4000000>;
- };
-
chosen {
bootargs = "console=ttyS0,115200";
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
};
};
- ethernet@10100000 {
- status = "okay";
- };
+ gpio-export {
+ compatible = "gpio-export";
- esw@10110000 {
- status = "okay";
- ralink,portmap = <0x3e>;
+ // Used to enable power-over-ethernet passthrough from port0 to port1.
+ // Disable passthrough by default to prevent accidental equipment damage.
+ poe {
+ gpio-export,name = "poe-passthrough";
+ gpio-export,output = <1>; // OUT_INIT_HIGH
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW
+ };
};
- wmac@10180000 {
- status = "okay";
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ // The following leds are defined in the ArcOS firmware, but reportedly
+ // not present in the Freestation5 device.
+ wifi {
+ label = "freestation5:unknown:wifi";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ powerg {
+ label = "freestation5:unknown:powerg";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "freestation5:unknown:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
};
+};
- otg@101c0000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x01>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};