#include <dt-bindings/input/input.h>
/ {
- compatible = "mediatek,linkit", "mediatek,mt7628an-soc";
+ compatible = "mediatek,linkit-smart-7688", "mediatek,mt7628an-soc";
model = "MediaTek LinkIt Smart 7688";
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
chosen {
bootargs = "console=ttyS2,57600";
};
gpio-leds {
compatible = "gpio-leds";
- wifi {
- label = "mediatek:orange:wifi";
- gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "on";
+ led_wifi: wifi {
+ label = "linkit-smart-7688:orange:wifi";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
wps {
linux,code = <KEY_WPS_BUTTON>;
};
};
-
- wgpio: gpio-wifi {
- compatible = "mediatek,gpio-wifi";
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
};
&pinctrl {
ralink,function = "gpio";
};
- perst {
- ralink,group = "perst";
- ralink,function = "gpio";
- };
-
refclk {
ralink,group = "refclk";
ralink,function = "gpio";
ralink,function = "gpio";
};
- wled_kn {
- ralink,group = "wled_kn";
- ralink,function = "gpio";
- };
-
wled_an {
ralink,group = "wled_an";
- ralink,function = "wled_an";
+ ralink,function = "gpio";
};
wdt {
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,chunked-io = <31>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
};
};