#include "mt7628an.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "mercury,mac1200rv2", "mediatek,mt7628an-soc";
+ compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
model = "Mercury MAC1200R v2";
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
- status {
+ led_status: status {
label = "mac1200rv2:green:status";
- gpios = <&gpio0 11 1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q128";
+ compatible = "jedec,spi-nor";
reg = <0 0>;
- linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x1d800>;
- };
-
- factory: partition@0x1d800 {
- label = "factory_info";
- reg = <0x1d800 0x800>;
- read-only;
- };
-
- art: partition@0x1e000 {
- label = "art";
- reg = <0x1e000 0x2000>;
- read-only;
- };
-
- partition@20000 {
- label = "config";
- reg = <0x20000 0x10000>;
- };
-
- partition@30000 {
- label = "u-boot2";
- reg = <0x30000 0x10000>;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x7c0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x1d800>;
+ };
+
+ factory: partition@1d800 {
+ label = "factory_info";
+ reg = <0x1d800 0x800>;
+ read-only;
+ };
+
+ art: partition@1e000 {
+ label = "art";
+ reg = <0x1e000 0x2000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ };
+
+ partition@30000 {
+ label = "u-boot2";
+ reg = <0x30000 0x10000>;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7c0000>;
+ };
};
};
};
ðernet {
pinctrl-names = "default";
mtd-mac-address = <&factory 0xd>;
- ralink,port-map = "llllw";
+ mediatek,portmap = "llllw";
};
&wmac {
&pcie {
status = "okay";
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&art 0x1000>;
- mediatek,2ghz = <0>;
- };
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&art 0x1000>;
+ ieee80211-freq-limit = <5000000 6000000>;
};
};