mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possible

[openwrt/openwrt.git] / target / linux / ramips / dts / MT7620a.dts

diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts
index debe52e7f396711f7c073102d9c7ebf786561813..bb7b60405788d1074240328623927942fd3d1855 100644 (file)
--- a/target/linux/ramips/dts/MT7620a.dts
+++ b/target/linux/ramips/dts/MT7620a.dts
@@ -2,26 +2,27 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
        compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
        model = "Ralink MT7620a + MT7610e evaluation board";
 
        gpio-keys-polled {
                compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                s2 {
                        label = "S2";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
 
                s3 {
                        label = "S3";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
                };
        };
 };
@@ -30,34 +31,37 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80", "en25q64";
+               reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
 };