#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "planex,mzk-ex300np", "ralink,mt7620a-soc";
model = "Planex MZK-EX300NP";
+ aliases {
+ led-status = &led_wps;
+ };
+
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "mzk-ex300np:green:wifi";
- gpios = <&gpio3 0 1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
- wps {
+ led_wps: wps {
label = "mzk-ex300np:green:wps";
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
rep {
label = "mzk-ex300np:blue:rep";
- gpios = <&gpio1 4 1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
wifi1 {
label = "mzk-ex300np:blue:wifi1";
- gpios = <&gpio1 1 1>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "mzk-ex300np:blue:wifi2";
- gpios = <&gpio1 2 1>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
wifi3 {
label = "mzk-ex300np:blue:wifi3";
- gpios = <&gpio1 0 1>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 1 1>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio1 3 0>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x730000>;
- };
-
- partition@780000 {
- label = "Udata";
- reg = <0x780000 0x80000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
};
};
};