ramips: improve Skylab SKW92A support

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / MZK-EX750NP.dts

diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts b/target/linux/ramips/dts/MZK-EX750NP.dts
index 21d47ddfa881edd5c719ef777d296f3f68b59a99..1ec79c65ea1809114ebdffd59ec0b09c31cf79a1 100644 (file)
--- a/target/linux/ramips/dts/MZK-EX750NP.dts
+++ b/target/linux/ramips/dts/MZK-EX750NP.dts
@@ -9,10 +9,17 @@
        compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
        model = "Planex MZK-EX750NP";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
        gpio-leds {
                compatible = "gpio-leds";
 
-               power {
+               led_power: power {
                        label = "mzk-ex750np:red:power";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
@@ -50,8 +57,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -80,38 +85,42 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x730000>;
-               };
-
-               partition@780000 {
-                       label = "Udata";
-                       reg = <0x780000 0x80000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x730000>;
+                       };
+
+                       partition@780000 {
+                               label = "Udata";
+                               reg = <0x780000 0x80000>;
+                       };
                };
        };
 };
@@ -138,12 +147,11 @@
 
 &pcie {
        status = "okay";
+};
 
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
        };
 };