/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
model = "Planex MZK-EX750NP";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- gpio3: gpio@688 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "w25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x730000>;
- };
-
- partition@780000 {
- label = "Udata";
- reg = <0x780000 0x80000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "llllw";
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pcie@10140000 {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
gpio-leds {
compatible = "gpio-leds";
- power {
+ led_power: power {
label = "mzk-ex750np:red:power";
- gpios = <&gpio0 14 1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wifi {
label = "mzk-ex750np:red:wifi";
- gpios = <&gpio3 0 1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wps {
label = "mzk-ex750np:green:wps";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
rep {
label = "mzk-ex750np:blue:rep";
- gpios = <&gpio2 16 1>;
+ gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
};
wifi1 {
label = "mzk-ex750np:blue:wifi1";
- gpios = <&gpio2 19 1>;
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "mzk-ex750np:blue:wifi2";
- gpios = <&gpio2 18 1>;
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
wifi3 {
label = "mzk-ex750np:blue:wifi3";
- gpios = <&gpio2 17 1>;
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 9 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 13 0>;
- linux,code = <0x211>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x730000>;
+ };
+
+ partition@780000 {
+ label = "Udata";
+ reg = <0x780000 0x80000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};