ramips: improve Skylab SKW92A support

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / PBR-D1.dts

diff --git a/target/linux/ramips/dts/PBR-D1.dts b/target/linux/ramips/dts/PBR-D1.dts
index da32c8dff92a36d628939400351552a29a3a1027..14a2c4e827359c1873c89b9b0ae14661e5a4f597 100644 (file)
--- a/target/linux/ramips/dts/PBR-D1.dts
+++ b/target/linux/ramips/dts/PBR-D1.dts
@@ -2,12 +2,20 @@
 
 #include "mt7628an.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-       compatible = "mediatek,pbr-d1", "mediatek,mt7628an-soc";
+       compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
        model = "PBR-D1";
 
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
@@ -26,27 +34,27 @@
 
                usb {
                        label = "pbr-d1:orange:usb";
-                       gpios = <&gpio0 0 1>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                        default-state = "off";
                };
 
-               power {
+               led_power: power {
                        label = "pbr-d1:orange:power";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
-               wps {
+               reset {
                        label = "reset";
-                       gpios = <&gpio1 38 1>;
-                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
@@ -95,34 +103,37 @@
        pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "w25q128";
                spi-max-frequency = <40000000>;
                m25p,chunked-io = <31>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x0fb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x0fb0000>;
+                       };
                };
        };