model = "PBR-M1";
aliases {
- led-status = &led_power;
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
};
memory@0 {
gpio-leds {
compatible = "gpio-leds";
- led_power: power {
+ power {
label = "pbr-m1:blue:power";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ default-state = "on";
};
- sys {
+ led_sys: sys {
label = "pbr-m1:blue:sys";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
&sdhci {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
};
};
};