#include "mt7621.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
model = "PBR-M1";
memory@0 {
power {
label = "pbr-m1:blue:power";
- gpios = <&gpio0 31 1>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
};
sys {
label = "pbr-m1:blue:sys";
- gpios = <&gpio1 0 1>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
internet {
label = "pbr-m1:blue:internet";
- gpios = <&gpio0 29 1>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "pbr-m1:blue:wlan2g";
- gpios = <&gpio1 1 1>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "pbr-m1:blue:wlan5g";
- gpios = <&gpio0 28 1>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
reset {
label = "reset";
- gpios = <&gpio0 18 1>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
power_usb2 {
gpio-export,name = "power_usb2";
gpio-export,output = <1>;
- gpios = <&gpio0 22 0>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
power_usb3 {
gpio-export,name = "power_usb3";
gpio-export,output = <1>;
- gpios = <&gpio0 25 0>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
};
power_sata {
gpio-export,name = "power_sata";
gpio-export,output = <1>;
- gpios = <&gpio0 27 0>;
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
- gpios = <&gpio0 26 1>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
};
pinctrl-0 = <&sdhci_pins>;
};
-&xhci {
- status = "okay";
-};
-
&spi0 {
status = "okay";
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
+ ieee80211-freq-limit = <5000000 6000000>;
};
};
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
};
};
};
mtd-mac-address = <&factory 0xe000>;
};
-
-
&pinctrl {
state_default: pinctrl0 {
gpio {