ramips: improve Skylab SKW92A support

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / PSR-680W.dts

diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts
index 8659a4d62a07de3bb2bd194416d2a0c0fb3c09cb..29b16fc446b541b9f571a29c2f9d920871cfdfa8 100644 (file)
--- a/target/linux/ramips/dts/PSR-680W.dts
+++ b/target/linux/ramips/dts/PSR-680W.dts
@@ -10,7 +10,10 @@
        model = "Petatel PSR-680W Wireless 3G Router";
 
        aliases {
-               led-status = &led_wan;
+               led-boot = &led_wan;
+               led-failsafe = &led_wan;
+               led-running = &led_wan;
+               led-upgrade = &led_wan;
        };
 
        chosen {
@@ -22,30 +25,34 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };