/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
/ {
#address-cells = <1>;
compatible = "RT-N15", "ralink,rt2880-soc";
model = "Asus RT-N15";
- palmbus@300000 {
- sysc@0 {
- ralink,pinmux = "uartlite";
- ralink,gpiomux = "i2c";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
- partition@40000 {
+
+ factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
- label = "linux";
+ label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
- ethernet@400000 {
- status = "okay";
-
- ralink,fixed-link = <1000 1 1 1>;
- };
-
- wmac@480000 {
- status = "okay";
- };
-
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 0>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
gpios = <&gpio0 0 0>;
linux,code = <0x211>;
};
+
reset {
label = "reset";
gpios = <&gpio0 12 0>;
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartlite", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};