compatible = "asus,rt-n56u", "ralink,rt3883-soc";
model = "Asus RT-N56U";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "u-boot-env";
- read-only;
- };
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
- partition@50000 {
- reg = <0x00050000 0x007b0000>;
- label = "firmware";
+ partition@50000 {
+ reg = <0x00050000 0x007b0000>;
+ label = "firmware";
+ };
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
reset {
gpio-leds {
compatible = "gpio-leds";
- power {
+ led_power: power {
label = "rt-n56u:blue:power";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
&pci {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
+};
- host-bridge {
- pci-bridge@1 {
- status = "okay";
+&pci1 {
+ status = "okay";
- wifi@1814,3091 {
- compatible = "pci1814,3091";
- reg = <0x10000 0 0 0 0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
- };
+ wifi@0,0 {
+ compatible = "pci1814,3091";
+ reg = <0x10000 0 0 0 0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
};
};