#include <dt-bindings/gpio/gpio.h>
/ {
+ compatible = "samknows,whitebox-v8", "mediatek,mt7621-soc";
model = "SamKnows Whitebox 8";
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
gpio-leds {
compatible = "gpio-leds";
- wps {
+ led_wps: wps {
label = "sk-wb8:green:wps";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
usb {
label = "sk-wb8:green:usb";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
};
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
-
};
};
&pcie {
status = "okay";
+};
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
};
+};
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
+&pcie1 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
};
};