ramips: specify "firmware" partition format in JBOOT devices
[openwrt/openwrt.git] / target / linux / ramips / dts / TEW-691GR.dts
index 3ac6074b87af8b068ba255b01cb094b37925c8b7..8fee29b83ae45c59b700c43671c9f4898920d766 100644 (file)
        model = "TRENDnet TEW-691GR";
 
        aliases {
-               led-status = &led_wps;
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+               led-running = &led_wps;
+               led-upgrade = &led_wps;
        };
 
        nor-flash@1c000000 {
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
                bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       reg = <0x0 0x0030000>;
-                       label = "u-boot";
-                       read-only;
-               };
-
-               partition@30000 {
-                       reg = <0x00030000 0x00010000>;
-                       label = "u-boot-env";
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       reg = <0x00040000 0x00010000>;
-                       label = "factory";
-                       read-only;
-               };
-
-               partition@50000 {
-                       reg = <0x00050000 0x007b0000>;
-                       label = "firmware";
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x0030000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               reg = <0x00030000 0x00010000>;
+                               label = "u-boot-env";
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               reg = <0x00040000 0x00010000>;
+                               label = "factory";
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               reg = <0x00050000 0x007b0000>;
+                               label = "firmware";
+                       };
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <100>;
 
                reset {