ramips: specify "firmware" partition format in JBOOT devices

[openwrt/openwrt.git] / target / linux / ramips / dts / TEW-691GR.dts

diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts
index eb2d4bc6af903e77a3d97967b270b5b66916354c..8fee29b83ae45c59b700c43671c9f4898920d766 100644 (file)
--- a/target/linux/ramips/dts/TEW-691GR.dts
+++ b/target/linux/ramips/dts/TEW-691GR.dts
@@ -1,111 +1,125 @@
 /dts-v1/;
 
-/include/ "rt3883.dtsi"
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "TEW-691GR", "ralink,rt3883-soc";
+       compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
        model = "TRENDnet TEW-691GR";
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite";
-                       ralink,gpiomux = "i2c", "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,pcimux = "pci-fnc";
-                       ralink,wdtmux = <1>;
-               };
-
-               timer@100 {
-                       status = "okay";
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
-               gpio1: gpio@638 {
-                       status = "okay";
-               };
-       };
-
-       ethernet@10100000 {
-               status = "okay";
-               phy-handle = <&phy0>;
-               phy-mode = "rgmii";
-
-               mdio-bus {
-                       status = "okay";
-
-                       phy0: ethernet-phy@0 {
-                               reg = <0>;
-                       };
-               };
-       };
-
-       wmac@10180000 {
-               status = "okay";
-               ralink,5ghz = <0>;
+       aliases {
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+               led-running = &led_wps;
+               led-upgrade = &led_wps;
        };
 
        nor-flash@1c000000 {
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
-
                bank-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       reg = <0x0 0x0030000>;
-                       label = "u-boot";
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@30000 {
-                       reg = <0x00030000 0x00010000>;
-                       label = "u-boot-env";
-                       read-only;
-               };
+                       partition@0 {
+                               reg = <0x0 0x0030000>;
+                               label = "u-boot";
+                               read-only;
+                       };
 
-               partition@40000 {
-                       reg = <0x00040000 0x00010000>;
-                       label = "factory";
-                       read-only;
-               };
+                       partition@30000 {
+                               reg = <0x00030000 0x00010000>;
+                               label = "u-boot-env";
+                               read-only;
+                       };
 
-               partition@50000 {
-                       reg = <0x00050000 0x007b0000>;
-                       label = "firmware";
+                       factory: partition@40000 {
+                               reg = <0x00040000 0x00010000>;
+                               label = "factory";
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               reg = <0x00050000 0x007b0000>;
+                               label = "firmware";
+                       };
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <100>;
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
+
                wps {
                        label = "wps";
-                       gpios = <&gpio1 2 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
+
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
-               wps {
-                       label = "trendnet:green:wps";
-                       gpios = <&gpio0 9 1>;
+
+               led_wps: wps {
+                       label = "tew-691gr:green:wps";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "uartf";
+                       ralink,function = "gpio";
                };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+
+       port@0 {
+               phy-handle = <&phy0>;
+               phy-mode = "rgmii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       phy-mode = "rgmii";
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+       ralink,mtd-eeprom = <&factory 0x0>;
+       ralink,5ghz = <0>;
+       mtd-mac-address = <&factory 0x4>;
+       mtd-mac-address-increment = <1>;
+};