/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "V11ST-FE", "ralink,rt2880-soc";
+ compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
model = "Ralink V11ST-FE";
- palmbus@300000 {
- sysc@0 {
- ralink,pinmux = "uartlite";
- ralink,gpiomux = "i2c", "jtag";
- ralink,uartmux = "gpio";
- ralink,pcimux = "pci-fnc";
- ralink,wdtmux = <0>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- ethernet@400000 {
- status = "okay";
- };
-
- wmac@480000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pci@10140000 {
- status = "okay";
-
- host-bridge {
- pci-bridge@1 {
- status = "okay";
- };
- };
+ aliases {
+ led-status = &led_status;
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
-
bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "u-boot-env";
- read-only;
- };
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
- partition@50000 {
- reg = <0x00050000 0x003b0000>;
- label = "firmware";
+ partition@50000 {
+ reg = <0x00050000 0x003b0000>;
+ label = "firmware";
+ };
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
- gpios = <&gpio0 0 0>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
- status {
+ led_status: status {
label = "v11st-fe:green:status";
- gpios = <&gpio0 12 1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
};
+
+&gpio0 {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+};
+
+&pci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};