/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
model = "Buffalo WHR-300HP2";
- palmbus@10000000 {
- gpio2: gpio@660 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "en25q64";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x6b0000>;
- };
-
- partition@700000 {
- label = "usercfg";
- reg = <0x700000 0x100000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
- ralink,function = "gpio";
- };
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
- };
- };
-
- ethernet@10100000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
-
- ralink,port-map = "llllw";
- };
-
- gsw@10110000 {
- ralink,port4 = "ephy";
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
};
gpio-leds {
compatible = "gpio-leds";
+
power {
- label = "buffalo:red:power";
- gpios = <&gpio0 7 1>;
+ label = "whr-300hp2:red:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
- status {
- label = "buffalo:green:status";
- gpios = <&gpio0 8 1>;
+
+ wifi {
+ label = "whr-300hp2:green:wifi";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- power2 {
- label = "buffalo:green:power";
- gpios = <&gpio0 9 1>;
+
+ led_power_green: power2 {
+ label = "whr-300hp2:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
- status2 {
- label = "buffalo:orange:status";
- gpios = <&gpio0 10 1>;
+
+ wifi2 {
+ label = "whr-300hp2:orange:wifi";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
+
internet {
- label = "buffalo:green:internet";
- gpios = <&gpio2 17 1>;
+ label = "whr-300hp2:green:internet";
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
+
router {
- label = "buffalo:green:router";
- gpios = <&gpio2 18 1>;
+ label = "whr-300hp2:green:router";
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
+
router2 {
- label = "buffalo:orange:router";
- gpios = <&gpio2 19 1>;
+ label = "whr-300hp2:orange:router";
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
- s1 {
+
+ reset {
label = "reset";
- gpios = <&gpio2 12 1>;
- linux,code = <0x100>;
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
- s2 {
+
+ aoss {
label = "aoss";
- gpios = <&gpio2 13 1>;
- linux,code = <0x101>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
- s3 {
+
+ ap {
label = "ap";
- gpios = <&gpio2 14 1>;
- linux,code = <0x102>;
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
- s4 {
+
+ bridge {
label = "bridge";
- gpios = <&gpio2 15 1>;
- linux,code = <0x103>;
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
};
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mediatek,portmap = "llllw";
+};
+
+&gsw {
+ mediatek,port4 = "ephy";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pa_pins>;
+};