#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
model = "Buffalo WHR-600D";
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
gpio-leds {
compatible = "gpio-leds";
power {
label = "whr-600d:red:power";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wifi {
label = "whr-600d:green:wifi";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- power2 {
+ led_power_green: power2 {
label = "whr-600d:green:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "whr-600d:orange:wifi";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
internet {
label = "whr-600d:green:internet";
- gpios = <&gpio2 17 1>;
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
router {
label = "whr-600d:green:router";
- gpios = <&gpio2 18 1>;
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
router2 {
label = "whr-600d:orange:router";
- gpios = <&gpio2 19 1>;
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio2 12 1>;
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
- gpios = <&gpio2 13 1>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
- gpios = <&gpio2 14 1>;
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
bridge {
label = "bridge";
- gpios = <&gpio2 15 1>;
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
};
};
};
&pcie {
status = "okay";
+};
- pcie-bridge {
- wifi@1814,5592 {
- compatible = "pci1814,5592";
- reg = <0x0000 0 0 0 0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci1814,5592";
+ reg = <0x0000 0 0 0 0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
};
};