/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "WHR-G300N", "ralink,rt3052-soc";
+ compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
model = "Buffalo WHR-G300N";
- memorydetect {
- ralink,memory = <0x0 0x200000 0x4000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
- };
- ethernet@10100000 {
- status = "okay";
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- esw@10110000 {
- status = "okay";
- ralink,portmap = <0x2f>;
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x3a0000>;
+ };
+
+ partition@3f0000 {
+ label = "user";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
};
gpio-leds {
compatible = "gpio-leds";
+
diag {
label = "whr-g300n:red:diag";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
+
router {
label = "whr-g300n:green:router";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
+
security {
label = "whr-g300n:amber:security";
- gpios = <&gpio0 14 1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
reset {
label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
+
aoss {
label = "aoss";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
+
router-off {
label = "router-off";
- gpios = <&gpio0 11 1>;
- linux,code = <0x102>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_2>;
};
+
router-on {
label = "router-on";
- gpios = <&gpio0 8 1>;
- linux,code = <0x103>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_3>;
};
};
+};
- wmac@10180000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};