#include "rt3050.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "WNCE2001", "ralink,rt3052-soc";
+ compatible = "netgear,wnce2001", "ralink,rt3052-soc";
model = "Netgear WNCE2001";
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l3205d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "config";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "language";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- label = "pot";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- partition@a0000 {
- label = "checksum";
- reg = <0xa0000 0x10000>;
- };
-
- partition@b0000 {
- label = "firmware";
- reg = <0xb0000 0x350000>;
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
+ aliases {
+ led-status = &led_power_green;
};
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
+ chosen {
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
- power-green {
+ led_power_green: power-green {
label = "wnce2001:green:power";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power-red {
label = "wnce2001:red:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wlan-green {
label = "wnce2001:green:wlan";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
wlan-red {
label = "wnce2001:red:wlan";
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
rt {
label = "rt";
- gpios = <&gpio0 11 1>;
- linux,code = <0x100>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
};
ap {
label = "ap";
- gpios = <&gpio0 7 1>;
- linux,code = <0x101>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
};
};
};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "config";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "language";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "pot";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "checksum";
+ reg = <0xa0000 0x10000>;
+ };
+
+ partition@b0000 {
+ label = "firmware";
+ reg = <0xb0000 0x350000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};