ramips: set usb led trigger via devicetree

[openwrt/openwrt.git] / target / linux / ramips / dts / WRTNODE2.dtsi

diff --git a/target/linux/ramips/dts/WRTNODE2.dtsi b/target/linux/ramips/dts/WRTNODE2.dtsi
index 294616c0f785dfef62b12db94594081c89ea9a02..b5746ca48eb46dd738ce23cdbfcf9d6c0a8c6abe 100644 (file)
--- a/target/linux/ramips/dts/WRTNODE2.dtsi
+++ b/target/linux/ramips/dts/WRTNODE2.dtsi
@@ -1,21 +1,22 @@
 #include "mt7628an.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "wrtnode,wrtnode2", "mediatek,mt7628an-soc";
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 5 1>;
+                       gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -25,34 +26,38 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x1fb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x1fb0000>;
+                       };
                };
        };
 
@@ -75,7 +80,7 @@
 
 &ethernet {
        mtd-mac-address = <&factory 0x4>;
-       ralink,port-map = "llllw";
+       mediatek,portmap = "llllw";
 };
 
 &sdhci {